Tf727 kickdown cable

The company offers turnkey kick-down kits for just about every Mopar engine and trans combo ever made by the factory. This kit will fit everything from 6 cylinders with 2 bl. You want to adjust the stop on the cable so just as the arm starts to move on the carb, the lever on the transmission starts to move too. Zip Code. Getting the length right requires swapping out levers, or sometimes even lengthening or shortening an existing lever. We taped both sides of the cable with good quality masking tape and cut away. Being able to get the trans set to shift consistently was a key factor in our consistency and helped us win the championship.

Lokar Throttle and Kickdown Cable Installation by Carl Wiese

Kickdown Cable Kits / Linkage

The LowDown On Stock Torqueflite KickDown Linkage Hot Rod Network

Resources Kickdown Cable Notes Bouchillon Performance Engineering

Need help with Kickdown Cable on TF Moparchat Home of MOPAR enthusiasts worldwide!

Results 1 - 10 of 18 Auto Trans Kick Down; Blower Drive Hi-Tech Kickdown Cable; For Chrysler ; Stainless Steel Housing.

Lokar Throttle and Kickdown Cable Installation by Carl Wiese

Not Yet Reviewed. Part Number. Refer to Figs. 1 and 2 for the component names. Step 1: Remove the cable end stop, kickdown throttle body fitting, and kickdown cable adjuster. Lokar KDHT Hi-Tech Kickdown Kit for Chrysler Transmission.

Kickdown Cable Kits / Linkage

Assault Racing Products A Chrysler/Plymouth/Dodge TF Stainless Steel Braided Kickdown Cable Detent. Stainless steel braided cables for Chrysler/Mopar transmissions.
Just wanted to thank you for a great product.

Copyright Bouchillon Performance Engineering.

Scrounging for that proper Kickdown Linkage? This requires a bit of effort as you have to climb under the truck.

Video: Tf727 kickdown cable Kick-Down Cable Adjustment - Monster Transmission

Unlike the factory kick-down linkage, the Lokar cable runs rearward toward the driveshaft before snaking forward toward the carburetor. There lots of adjustment on the cable and on the housing at both ends.

XIAOMI MI BOX CHANNEL LIST

I now have about 1 inch of excess at the carb so the throttle has to engage at least that far before the kickdown lever begins to move. Password Mark Forums Read. Similar Threads. The next step is to install the kick down cable. Note that the kick-down lever does not come with the Lokar kit—you will need to get that from your trans supplier. The LowDown On Stock Torqueflite KickDown Linkage Hot Rod Network Is this too much or not enough?

Our TorqueFlite Kickdown Cable Kit will work with ANY and ALL Applications -- our products truly cover the entire Mopar line-up! To show you what we mean. In lieu of a kick-down cable, the TorqueFlite uses a series of rods.

as you can see in this mocked-up LA-series small-block/ combo. Mancini Kickdown Cable/Hardware Kit. Fits: Most $$ Mancini Racing Accelerator Cable Mounting Bracket Fits: Torqueflite $
Before securing it to the kick-down lever, it may be necessary to grind down the extra threads on the fitting to prevent interference between it and the shift lever just below it.

You want to adjust the stop on the cable so just as the arm starts to move on the carb, the lever on the transmission starts to move too. I'm hoping you'll keep us up to date with your progress as I've been having a problem with my kickdown as well. There lots of adjustment on the cable and on the housing at both ends.

Resources Kickdown Cable Notes Bouchillon Performance Engineering

To do this you will have to remove the throttle arm end fitting off of the cable. One word of warning, while you pay a premium for the quality of these cables the instructions leave a little something to be desired.

JACK S BACK SOUNDTRACK FIFTY

The kick down lever is held in through a simple cotter pin. We had to build a few brackets, but it worked. A single Lokar kick-down cable takes the place of three rods, two bellcranks, and multiple brackets. Need help with Kickdown Cable on TF Moparchat Home of MOPAR enthusiasts worldwide! As you can see from the picture above there is a hole in the bottom of the throttle arm. It wont shift till about mph. Installing an adjustable cable saves the headaches involved with trying to figure out the ideal combination of factory linkage components to make the kick-down system work properly.