To enter Auxiliary function setting mode 2, press the Key for 3 seconds while holding down the and keys in the Program standby mode or in the Program control run mode. Name and functions of sections 2. In this case, Step 1 SV is and Step 1 time is 1 hour. Default: No alarm action for Alarm 1 A1 and Alarm 2 A2 Event output One of the outputs can be selected by the front keypad from a choice of: Time signal output, Pattern end output and Run program control run output. In this mode, the currently selected pattern number is indicated on the PTN display, and actual temperature is indicated on the PV display. Page Specifications Other functions 49 Page Setup Alarm action, Control action, etc.
Thank you for purchasing our Programmable Controller PCDA.
Shinko PCD 1/4 DIN Economic Program Controller
Shinko Technos CO., LTD. is not liable for any damage or secondary damage(s) incurred as If power failure occurs during fixed value control, fixed value control resumes. To prevent accidents arising from the misuse of this controller, please ensure the.
Select a communication speed for the PCDA according to that of the host computer. Shinko protocol), or when LRC discrepancy (for Modbus protocol.
Video: Shinko pcd 33a controller resume Resume Samples
View and Download Shinko PCDA instruction manual online. PCDA Controller pdf manual download.
This may cause electric shock or problems in operation.
Control and Alarm action 8. Troubleshooting If any malfunctions occur, refer to the following items after checking the power and wiring.
To register the values, use the or Key.
Shinko Technos PCD33A Programmable Controllers
Notice As the case is made of resin, do not use excessive force while screwing in the mounting bracket. Step numbers progress fast and program control stops soon after it has started. If the derivative time is shortened, restoring value becomes small, and if the derivative time is made longer, an excessive returning phenomenon may occur and the control system may be oscillated.
(Set value digital Available only when Shinko protocol is selected in [ Communication protocol].
restored. H: Continues (resumes) after.
Video: Shinko pcd 33a controller resume (Hi Speed Long Edit) PCD-Chipbreaker - VCGW332CB KP300
Shinko PCD 1/4 DIN Economic Program Controller from Canada's leading supplier of Economic Program Controller - Shinko 1/4 DIN Model PCD
Page 5: Model Names 1. Program pattern 1 is selected. Model labels are attached to the case and the left side of the inner assembly. Explanation of Operation For the explanation of each setting item pages 24 to 33current status of each display is indicated with diagrams on the left side, and its item name and operation method are described on the right side.
Shinko PCD33A Instruction manual
Specifications When the integral time is shortened, the returning speed to the SV desired value is accelerated.
Copy the program pattern table and follow the procedure mentioned below.
Shinko pcd 33a controller resume
|If the Key is pressed at Step 1 SV setting, the set value is saved, and the setting item proceeds to the [Step 1 time setting].
Mounting to the control panel 3. Page 64 For any inquiries about this unit, please contact the shop where you purchased the unit after checking the following.
Actual temp. Operation 6.